Welcome: Industrial Automation Parts
| Number of analogue outputs | 8 |
|---|---|
| Input, current | No |
| Input, voltage | No |
| Input, resistor | No |
| Input, resistance thermometer | No |
| Input, thermocouple | No |
| Output, current | Yes |
| Output, voltage | Yes |
| Analogue inputs configurable | No |
| Analogue outputs configurable | Yes |
| Type of electric connection | Screw-/spring clamp connection |
| Capacitive load, max | 1 μF (voltage mode only) |
| Inductive load, max | 1 mH (current mode only) |
| Module keying | Electronic keying via programming software |
| Scan time | Per group 0...3: 1 ms, Per group 0...7: 2 ms |
| Step response time to 63% of value | Voltage mode: 18 μs max, Current mode: 1 ms max |
| Module conversion method | R-Ladder DAC, monotonicity with no missing codes |
| Outputs | 8 voltage or current |
| Open circuit detection | Current mode only |
| Drive capability | Voltage: 1000 Ω minimum, Current: 500 Ω maximum |
| RTB torque | 5069-RTB18-SCREW RTB only: 0.4 Nm (3.5 lbin) |
| Overvoltage protection, max | ±32V DC |
| Short circuit detection | Voltage mode only – output electronically limited to 16 mA or less |
| Data format | IEEE 32-bit floating point |
| Wire category | 2 - shielded input ports, 2 - power ports, 1 wire per terminal for each signal port |
| Power dissipation, max | 5.3 W |
| Indicators | 1 green/red module status indicator, 8 yellow/red I/O status indicators |
| Thermal dissipation, max | 18.1 BTU/hr |
| Accuracy drift with temperature | Voltage: 0.30% full scale, Current: 0.50% full scale |
We chat
